TM   9-2815-202-34 4-9.   WATER   PUMP   REMOVAL/lNSTALLATION This  task  covers: a.  Removal b.  Installation c.  Gear  Backlash Adjustment INITIAL    SETUP MODELS MANDATORY   REPLACEMENT   PARTS 7083-7395 7083-7398 3   Lockwashers   (App   F,   Item   94) 1  Seal  ring  (App  F,  Item  133) TOOLS  AND  SPECIAL  TOOLS EQUIPMENT   CONDITION General mechanics tool kit (App B, Item 96) Magnetic base dial indicator (App B, item 45) Torque wrench (App B, Item 101) Para  Description 4-4 Fuel filter bracket removed 4-6 Fuel line clip removed 4-8 Water  bypass  tube  removed 3-6 Water  outlet  removed a.   Removal (1) Remove bolt (1), two bolts (2), three Iockwashers (3), and flat washer (4) securing water pump (5) to engine front cover (6). Discard Iockwashers. CAUTION Use care when removing water pump to prevent damage to gear teeth. (2) Remove water pump  (5) from engine front cover (6). Remove seal ring (7) and discard. b.   Installation (1) (2) (3) Affix seal ring (7) to back of water pump (5). Install water pump (5), alining gear teeth with drive gear in engine front cover  (6). Install bolt (1), two bolts (2), three lock- washers (3), and flat washer (4) securing water pump (5) to front cover (6). Torque bolts to 46-50 Ib-ft (62-68 N-m). 4-20