TM 9-2815-202-34
4-12. FUEL PUMP REPLACEMENT (Cont)
(12) Lubricate drive shaft (5) with clean engine oiI. lnsert square end of drive shaft (5) from gear
side of fuel pump body (8) through oil seals (20).
NOTE
If driven gear assembly is chamfered, install gear facing fuel pump body. If driven gear
assembly has a slot, install gear so slot faces pump body cover.
(13)
(14)
(15)
(16)
Install driven gear and shaft assembly (12) in fuel pump body (8).
Lubricate gears and shafts with clean engine oil.
Apply a very thin coat of sealant on pump body cover (7) surface. Do not allow sealant to
enter gear compartment.
Aline fuel pump body (8) with pump body cover (7). Secure with four bolt and Iockwasher
assemblies (6).
4-44
|
|
