TM 9-2815-202-34
4-13. AIR INLET HOUSING REPLACEMENT
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
MODELS
EXPENDABLE/DURABLE SUPPLIES
7083-7395
7083-7396
Cleaning solvent (App C, Item 10)
7083-7398
7083-7399
EQUIPMENT CONDITION
TOOLS AND SPECIAL TOOLS
Para Description
General mechanics tool kit (App B, Item 96)
4-2
Air inlet tube removed (7083-7395)
Torque wrench (App B, Item 101)
4-10 Air box heater removed (7083-7395 and
7083-7396)
I
5-2
Air inlet tube removed (7083-7396)
MANDATORY REPLACEMENT PARTS
6-3
Air inlet tube removed (7083-7398)
3 Lockwashers (App F, Item 93)
1 Gasket (App F, Item 23)
a. Removal
(1) Remove three bolts (1), three flat washers (2), and three Iockwashers (3) securing air inlet
housing (4) and gasket (5) to blower. Remove air inlet housing and gasket. Discard
Iockwashers and gasket.
NOTE
For models 7395 and 7398 only.
(2) If necessary, remove pipe plugs (6 and 7) from air inlet housing (4).
b. Cleaning/Inspection
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective
goggles and gloves and use only in a well-ventilated area. Avoid contact
with skin, eyes, and clothes. Don’t breathe vapors. Do not use near open
flames or excessive heat. The flash point is 100oF-138oF (38°-50oC). If
you become dizzy while using cleaning solvent, get fresh air immediately
and get medical aid. If contact with eyes is made, wash your eyes with
water and get medical aid immediately.
(1) Clean air inlet housing with cleaning solvent.
4 - 4 6 Change 1
|
|
