4-22. FLYWHEEL ASSEMBLY REPLACEMENT
This task covers:
MANDATORY REPLACEMENT PARTS
General mechanics tool kit (App B, Item 96)
Multiple sling (App B, Item 83)
Guide studs (App B, Item 86)
Torque wrench (App B, Item 101)
Dial indicator gage (App B, Item 44)
Flywheel housing gage (App B, Item 30)
8 Bolts (App F, Item 3)
Cleaning solvent (App C, Item 10)
Heat indicating crayon (App C, ltem 23)
Wood block (App C, Item 46)
International compound no.2
(App C, Item 24)
To aid in reinstallation, aline and mark two holes of scuff plate, crankshaft, and flywheel
Attach multiple sling (1) to flywheel (2) with two 3/8-16 eye bolts (3).
Attach lifting sling (1) to chain hoist (4).
Remove two flywheel attaching bolts (5) and discard. Install two guide studs (6) in bolt holes
to support flywheel assembly (2).
Remove six remaining flywheel attaching bolts (5) and scuff plate (7). Discard bolts.
Remove flywheel assembly (2) from crankshaft (8) and flywheel housing (9).
Remove guide studs (6) from crankshaft (8).