TM 9-2815-202-34
(3) Thread four guide studs (10) into cylinder block to guide flywheel housing clear of
crankshaft.
(4) Remove seven bolts (11 ) and seven lockwashers (12) from upper part of flywheel housing.
Discard Iockwashers.
(5) Remove two bolts (13) and two Iockwashers (14) from front of flywheel housing. Discard
Iockwashers.
(6) Remove four nuts (15), four Iockwashers (16), four bolts (17), and four flat washers (18) from
access cover (19). Remove two bolts (20) and two Iockwashers (21) from cover (19). Remove
cover (19) and gasket (22) from flywheel housing. Discard gasket and Iockwashers.
C h a n g e 1 4-81
|
|
