When removing bearings, support inner race only, or damage to bearing may result.
Support shaft (8) on inner race of inner bearing (12). Remove inner bearing.
Invert shaft (8) in arbor press. Support shaft on inner race of outer bearing (13). Press shaft
off outer bearing. Remove outer bearing.
Remove oil seal (14) from pump body
(4). Discard oil seal.
Remove water pump seal (15) from
pump body (4). Discard seal.
Step (11 ) is for models 7395 and 7398.
(11) If necessary, remove two pipe plugs
(16) and pipe plug (17) from pump
Dry cleaning solvent P-D-680 is toxic
and flammable. Wear protective
goggles and gloves and use only in a
well-ventilated area. Avoid contact with
skin, eyes and clothes and dont breath
vapors. Do not use near open flames or
excessive heat. The flash point is
100oF-138oF (38o-50oC). If you become
dizzy while using cleaning solvent, get
fresh air immediately and get medical
aid. If contact with eyes is made, wash
your eyes with water and get medical