TM  9-2815-202-34 5-5.  ENGINE   LIFTING   BRACKETS   REPLACEMENT This  task  covers: a.  Removal b. Installation INITIAL   SETUP MODELS n 7083-7391 7083-7396 7083-7399 MANDATORY  Replacement  PARTS 8 Lockwashers (App F, Item 94) 4 Gaskets (App F,ltem 34) TOOLS  AND  SPECIAL  TOOLS EQUIPMENT   CONDITION General mechanics tool kit (App B, Item 96) Torque wrench (App B, Item 101) Para  Description 5-8 Air box heater line removed (Except 7083-7391) a.  Removal (1) (2) (3) (4) (5) Remove two bolts (1) and two Iockwashers (2) securing engine lifting bracket (3) to front of right  cylinder  head.  Remove  bracket  and  discard  Iockwashers. Remove gasket (4) from front of cylinder head. Discard gasket. Remove two bolts (5) and two Iockwashers (6) securing engine lifting bracket (7) to rear of right  cylinder  head.  Remove  bracket  and  discard  Iockwashers. Remove gasket (8) from rear of cylinder head. Discard gasket. Repeat steps (1) thru (4) for removal of left cylinder head lifting brackets. b.  Installation (1) (2) (3) Install two bolts (5), two Iockwashers (6), and gasket (8) securing rear engine lifting bracket (7) to right cylinder head. Torque bolts to 46-50 Ib-ft (62-68 N-m). Install two bolts (1), two Iockwashers (2), and gasket (4) securing front engine lifting bracket (3) to right cylinder head. Torque bolts to 46-50 Ib-ft (62-68 N-m). Repeat steps 1 and 2 for installation of left engine lifting brackets. END  OF  TASK FOLLOW-ON  MAINTENANCE Para   Description 5-8 Install air box heater line (Except 7083-7391) 5-10 C h a n g e    1