Insure cam follower is not cocked in
cam follower bore. With cam follower
guide installed, bottom of cam
follower body must be flush with fire
Attach four cam follower guides (21) to
cylinder head using eight Iockwashers (20)
and eight bolts (19). Torque bolts to 12-15
Ib-ft (16-20 N-m).
Measure clearance between cam follower
guide (21) and cam follower legs using
feeler gages (104). Clearance must be at
least 0.005 inch.
If clearance is insufficient, slightly loosen
bolts (19) and tap corners of guide (21)
with brass rod. Retorque bolts with proper
C h a n g e 1