6-3. TURBOCHARGER REMOVAL/lNSTALLATION
This task covers:
TOOLS AND SPECIAL TOOLS
General mechanics tool kit (App B, Item 96)
Torque wrench (App B, Item 101)
MANDATORY REPLACEMENT PARTS
Tape (App C, Item 27)
3-11 Turbocharger oil supply line removed
Turbocharger air regulator line
6 Locking nuts (App F, Item 104)
PERSONNEL REQUIRED: 2
1 Gasket (App F, Item 40)
Loosen two clamps (1) and slide rubber connector (2) onto turbocharger oil drain tube (3).
Loosen two clamps (4) on hose connector (5) connecting air inlet housing (6) to
turbocharger (7). Slide hose and two clamps onto air inlet housing.
Remove six locking nuts (8) securing turbocharger (7) to exhaust tee (9). Discard locking
Engine components are heavy. To prevent personal injury, use extreme
caution when removing large components from engine.
Turbocharger is heavy. Use two persons or lifting device to prevent dropping and
damage to turbocharger.
Tape all openings of turbocharger after removal to keep foreign particies from
entering and damaging turbocharger blades.
(4) Remove turbocharger (7) and gasket (10). Discard gasket.