6-3. TURBOCHARGER REMOVAL/lNSTALLATION (Cont)
(1) install gasket (10)on exhaust tee (9).
(2) Slide hose (5) and two clamps (4) onto air inlet housing (6). Slide rubber connector (2) and
two clamps (1) onto oil drain tube (3).
Engine components are heavy. To prevent personal injury, use extreme
caution when removing large components from engine.
Turbocharger is heavy. Use two persons or lifting device to prevent dropping and
damage to turbocharger.
Install turbocharger (7) on exhaust tee (9) and secure with six locking nuts (8). Torque nuts to
83-93 Ib-ft (113-126 N-m).
Slide hose (5) and two clamps (4) from air inlet housing (6) onto turbocharger (7). Tighten
Slide rubber connector (2) and two clamps (1) on turbocharger oil drain tube (3) onto
flywheel housing cover (11 ). Tighten clamps.
END OF TASK
Install turbocharger regulator air line
3-11 Install turbocharger oil supply line
Privacy Statement -
Copyright Information. -