TM 9-2815-202-34
Section IV. REMOVAL/lNSTALLATION
PRIOR TO INSTALLATION OF ENGINE
3-6. OIL COOLER REMOVAL/lNSTALLATION
OF ENGINE ACCESSORIES
ONTO MAINTENANCE STAND
This task covers:
a. Removal
b. Installation
INITIAL SETUP
MODELS
MANDATORY REPLACEMENT PARTS
n All
1 Gasket (App F ltem 53)
2 Gasket (App F, ltem 35)
12 Lockwashers (App F, ltem 93)
TOOLS AND SPECIAL TOOLS
PERSONNEL REQUIRED: 2
General mechanics tool kit (App B, Item 96)
Guide studs (App D, Item 3)
Torque wrench (App B, Item 101)
a. Removal
(1) Loosen two clamps (1)securing hose (2)to tube (3)and water pump outlet.
(2) Remove four bolts (4) and four lockwashers (5)securing tube (3)to oil cooler (6). Discard
Iockwashers.
(3) Remove tube (3), hose (2), and gasket (7). Discard gasket.
(4) Clean and remove all traces of gasket material from tube and oil cooler.
3-30 Change 1
|
|
