INDUCTION LEAK TEST
THIS WORK PACKAGE COVERS:
Before Test, Test, and After Test
General mechanic's tool kit (item 121, WP 0176)
Track Vehicle Repairer (1) 63H10
Regulator assembly (item 97, WP 0176)
Engine level on flat surface
Turbosupercharger covers (2) (item 10, WP 0177)
Left and right banks must be tested separately and engine front and
rear vents must be open.
Procedure is the same for each bank of the engine.
1. Remove pipe plug (1) from damper housing (2) to vent the front of the engine.
WP 0037 00-1