FUEL/WATER SEPARATOR OPERATION TESTS
BEFORE TESTS (Continued)
Do not smoke or allow open flames or sparks in areas where diesel
fuel is used or stored. DEATH or severe injury may result if
personnel fail to observe this precaution.
Remove filters and replace at end of test according to procedures in
Fuel/Water Separator Filters Repair and Element Replacement, WP
2. Remove cover (8).
a. Remove eight screws (9) with lock
washers (10) and flat washers (11) to
remove fuel/water separator cover (8).
Discard lock washers (10).
3. Check fuel level in fuel/water separator (1).
a. Fuel should be visible with cover
removed. If not, add fuel until you can
visibly see it.
WP 0042 00-2