Quantcast AFTER TESTS (Continued) - TM-9-2815-220-240281

Custom Search
 
  
 
TM 9-2815-220-24
FUEL/WATER SEPARATOR OPERATION TESTS
0042 00
AFTER TESTS (Continued)
7. Replace filters (items 195 and 196,
9
WP 0175) and bleed system according to
procedures in "Fuel/Water Separator Filters
8
10
Repair/Replace Elements," WP 0085.
8. Install cover (8).
11
a. Remove and discard O-ring (26).
26
b. Assure that mounting surfaces are clean
and new O-ring (26) (item 197,
WP 0175) is in place.
c. Secure cover (8) using eight screws (9)
with new lock washers (10) (item 92,
WP 0175) and flat washers (11).
8. Install fuel/water separator (1) to mounting
bracket (2).
2
a. Place sensor wires (7) through clamp (6).
1
b. Position fuel/water separator in place
7
against bracket (2) and move sensor
6
wires (7) in place for mounting bolt (3).
5
4
3
c. Secure fuel/water separator (1) and
sensor wires (7) using four screws (3),
with new lock washers (4) (item 93,
WP 0175) and flat washers (5).
END OF WORK PACKAGE
WP 0042 00-11 (12 blank)

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.