STARTER MOTOR REPLACEMENT
On early model engines, the low voltage protective module is mounted
on the crankcase near the starter. In order to gain clearance for
starter removal, the low voltage protective module must be removed
prior to starter removal.
3. (Early models only) Disconnect low voltage
protective module (18).
a. Disconnect wiring harness electrical
connector (19) from module (18).
b. Remove wiring clamps and/or tie wraps
as necessary (not illustrated).
c. Remove four screws (20) with lock
washers (21) to remove starter low
voltage protective module (18) and
bracket (22) as an assembly. Discard
WP 0049 00-3