Quantcast INSTALLATION (Continued) - TM-9-2815-220-240356

Custom Search
 
  
 
TM 9-2815-220-24
COOLING FANS, VANES, FAN HOUSINGS, AND SEALS REPLACEMENT
INSTALLATION (Continued)
NOTE
Front and rear fan housings must be aligned for clearance with tips of
fan blades. Install all fasteners and snug tighten only until clearance
is obtained.
3. Install rear fan housing (17).
a. Place rear fan housing (17) into position and secure using two screws (11) with two new
lock washers (12) (item 94, WP 0175) and two flat washers (13). Do not tighten
screws (11) at this time.
4. Install front fan housing (10).
a. Place front fan housing (10) into position and secure using two screws (11 with two new
lock washers (12) (item 94, WP 0175) and two flat washers (13). Do not tighten
screws (11) at this time.
b. Install two screws (16) to fasten front fan housing (10) to rear fan housing (17). Secure
with two new self-locking nuts (14) (item 113, WP 0175) using flat washers (15). Hand
tighten only at this time.
15
14
16
11
10
12
13
17
WP 0054 00-4

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.