WIRING HARNESS REPLACEMENT, STARTER, SMOKE GENERATOR, AND DUST
DETECTOR WITH LOW VOLTAGE PROTECTION MODULE TOP MOUNTED
(2CA, 2DA) (PART NUMBERS 11655454, 12314619, AND 12354468)
For smoke generation systems with dual-solenoid configuration,
harness installation instructions are covered in step 3.
For smoke generation systems with single-solenoid configuration,
harness installation instructions are covered in step 4.
3. Harness installation with dual solenoid smoke generator harness.
a. Install smoke generator solenoid connectors (40).
b. Install dust detector and smoke generator leads into loop clamp (39) and secure with new
self-locking nut (38) (item 33, WP 0175).
c. Install tie wraps (41) (item 80, WP 0175) as necessary.
WP 0060 00-18