SMOKE GENERATOR WIRING HARNESSES (2DR) REPLACEMENT
(PN 12354467, 11672386)
e. Remove screws (18), lock washers (19), and loop clamps (20) retaining smoke generator
harness (9) along generator side of engine. Discard lock washers.
f. Cut and remove tie wraps (21).
g. Disconnect electrical plug connector at T connection (22) of starter ground circuit.
18, 19, 20 (three places)
21 (Various places along harness)
1. See Work Package 0028 for Standard Cleaning Procedures.
All parts must be inspected with care. Replace part if damage or wear exceeds allowable
1. See Work Package 0028 for Standard Inspection Procedures.
1. See Work Package 0056 for Wiring Harness Cable and Repair.
WP 0068 00-4