DISASSEMBLY - TM-9-2815-220-240599

Custom Search

Back
REMOVAL (Continued)

Up
TM-9-2815-220-24 Maintenance Manual for AVDS-1790 2CA 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

Next
INSTALLATION

TM 9-2815-220-24

OIL FILL TUBE REPLACE/REPAIR

0075 00

DISASSEMBLY

1. Remove spring (10).

2. Remove and discard preformed packing (11)

from cap (12).

NOTE

Do not remove two cap screws (13)

fastening cap (12) to tube (9)

unless inspection indicates

replacement is necessary. The

screws are staked in place.

3. If necessary, remove two cap screws (13).

CLEANING

1. See Work Package 0028 for Standard

Cleaning Procedures.

INSPECTION

All parts must be inspected with care.

Replace parts if damage or wear exceeds

allowable limits.

1. See Work Package 0028 for Standard

Inspection Procedures.

ASSEMBLY

1. Install new preformed packing (11) (item 285, WP 0175) in cap (12).

2. Assemble cap (12) to tube (9).

a. Position cap (12) over tabs on tube (9) and secure with two screws (13).

b. Snug-tighten two screws (13) so that cap (12) can open and close freely.

c. Stake screws (13) in place.

3. Install spring (10).

WP 0075 00-3