Quantcast ASSEMBLY - TM-9-2815-220-240699

Custom Search
 
  
 
TM 9-2815-220-24
PRIMARY FUEL FILTER REPAIR/ELEMENT REPLACEMENT
0086 00
ASSEMBLY
1. Install helical spring (15), element retainer (14), new O-ring (13) (item 4, WP 0175) and new
filter element (12) (item 217, WP 0175) inside filter body (1).
NOTE
Do not tighten self-locking nut on filter cover screw. It should be just
snug enough to hold screw yet still allow screw to turn to secure cover.
Use thread sealing tape (item 41, WP 0173) on all threaded fittings
except filter cover screw.
2. Install bleeder valve (3), new gasket (18) (item 199, WP 0175), flat washer (17), screw (9) and
new self-locking nut (16) (item 112, WP 0175) to filter cover (10).
3. Install filter cover (10) using a new gasket (11) (item 198, WP 0175).
a. Torque screw (9) to 85-95 inch-pounds (9.7-10.7 Nm).
5. Install elbow (19), connector (20), and fluid filter fitting (21) on filter body (1).
16
11
21
10
18
17
19
9
3
1
15
20
14
13
12
WP 0086 00-5

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.