TURBOSUPERCHARGER ASSEMBLY REPLACEMENT (2CA & 2DA)
Early models may have a two-piece hose
connection between the air outlet elbow and
intake manifold. If your engine has the two-
piece hose connection, you should replace
the existing (two hose and intermediate
pipe) set-up with the one-piece hose (part
number 11682625). Failure to comply may
lead to premature engine failure due to dust
6. Remove air outlet elbow (25).
a. Loosen self-locking nuts on hose clamps (26).
b. Remove six self-locking nuts (27) and remove air outlet elbow (25). Discard nuts.
c. Remove and discard air outlet elbow gasket (28).
7. Remove turbosupercharger (29) mounting nuts.
a. Remove two self-locking nuts (30) with flat washers (31) at turbosupercharger mounting
base studs. Discard locking nuts.
WP 0099 00-6