TURBOSUPERCHARGER ASSEMBLY REPLACEMENT (2CA & 2DA)
Early models may have a two-piece hose
connection between the air outlet elbow and
intake manifold. If your engine has the two-
piece hose connection, you should replace the
existing (two hose and intermediate pipe) set-
up with the one-piece hose (part number
11682625). Failure to comply may lead to
premature engine failure due to dust
3. Install air outlet elbow (25).
a. Install air outlet elbow (25) with new gasket (28) (item 309, WP 0175) and secure using
six new self-locking nuts (27) (item 33, WP 0175). Do not tighten at this time.
b. Reposition and tighten hose clamps (26) until spring bottoms, then back-off 1 to 1-1/2
WP 0099 00-11