TURBOSUPERCHARGER ASSEMBLY REPLACEMENT (2CA & 2DA)
New turbosuperchargers do not come with oil supply hose fittings.
Old fittings must be reused or new fittings acquired when installing a
5. Install turbosupercharger oil supply hose (17).
a. Feed oil inlet hose (17) through shroud (21).
b. Install oil inlet hose grommet (20).
c. Apply a small amount of engine oil (item 21, WP 0173) to oil inlet adapter (19) and oil
inlet elbow (18).
d. Install oil inlet adapter (19) and oil inlet elbow (18) in turbosupercharger.
e. Connect oil inlet supply hose (17).
WP 0099 00-14