TURBOSUPERCHARGER ASSEMBLY REPLACEMENT (2DR)
Early models may have a two-piece hose
connection between the air outlet elbow and
intake manifold. If your engine the two-
piece hose connection, you should replace
the existing (two hose and intermediate
pipe) set-up with the one-piece hose (part
number (11682625 ). Failure to comply may
lead to premature engine f ailure due to dust
3. Remove air outlet elbow (12).
a. Loosen self-locking nuts on hose clamps (13).
b. Remove six self-locking nuts (14) and remove air outlet elbow (12) with gasket (15) (not
c. Discard air outlet elbow gasket (15) and self-locking nuts.
4. Remove turbosupercharger (16) mounting nuts (17).
a. Remove two self-locking nuts (17) with flat washers (18) at turbosupercharger mounting
base (19). Discard self-locking nuts.
WP 0100 00-4