Custom Search
 
  
 
TM 9-2815-220-24
TRANSMISSION SPACER RING ADAPTER REPLACE/REPAIR (2DR)
0101 00
CLEANING
1. See Work Package 0028 for General Cleaning Procedures.
INSPECTION
All parts must be inspected with care. Replace parts if damage or wear exceeds allowable
limits.
1. See Work Package 0028 for General Inspection Procedures.
REPAIR
1. Replace damaged, bent, or stripped studs (8). Refer to Work Package 0028 for procedures and
to the following table for stud size and setting height.
Location
Setting Height
Quantity
Stud Size and Length
Required
8
1-5/16
24
1/2-13 (3/4) X 1/2-20 (13/16) X 1-5/16
INSTALLATION
1. Apply Lubriplate (item 23, WP 0173) to new O-ring (7) (item 319, WP 0175) and install on
spacer (1).
2. Place spacer (1) into position and secure using 17 screws (2) with new lock washers (3)
(item 95, WP 0175).
3. Install two screws (4) and secure with new self-locking nuts (5) (item 28, WP 0175).
4. Torque 19 screws (2, 4) to 23-27 foot-pounds (31-37 Nm).
1
7
3
2
4
6
8
5
END OF WORK PACKAGE
WP 0101 00-2

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business