FLYWHEEL AND SPUR GEAR REPLACEMENT (2CA, 2DA)
1. See Work Package 0028 for General Cleaning Procedures.
All parts must be inspected with care. Replace parts if damage or wear exceeds allowable
1. See Work Package 0028 for General Inspection Procedures.
1. Install eyebolt (6) (item 65, WP 0176) in threaded hole of flywheel (2).
Flywheel is heavy. Be sure that lifting device is attached and do not
allow flywheel to swing about uncontrolled. Failure to comply may
result in personal injury.
2. Install flywheel (2).
a. Attach a suitable lifting device (7) and
align dowel pin holes in flywheel (2)
with dowel pins (8) in crankshaft.
b. Rotate crankshaft as necessary to align
dowel pins (8) with holes in flywheel (2).
WP 0102 00-4