DAMPER HOUSING OIL CONTROL VALVES, REPAIR/REPLACE
The oil pressure sleeve may be difficult to remove because of varnish
from oil. An improvised tool used with a slide hammer puller may be
used to assist in removing oil pressure sleeve.
4. Remove oil pressure regulator valve (15).
a. Insert hook end of valve sleeve remover (16) (item 7, WP 0177) and slide hammer (17)
(item 88, WP 0176) into hole in oil pressure sleeve (18), and gently tap until oil pressure
sleeve (18) is free.
b. Remove pressure regulator valve (15) from sleeve (16).
1. See Work Package 0028 for General Cleaning Procedures.
All parts must be inspected with care. Replace parts if damage or wear exceeds allowable
1. See Work Package 0028 for General Inspection Procedures.
WP 0106 00-3