EXHAUST MANIFOLDS AND ASSOCIATED PARTS REPLACEMENT
Early model exhaust manifolds were not clamped outside of the
engine cooling shrouds. If you have an early model exhaust system,
you should consider upgrading to the new system. The new exhaust
pipes are made of heavier material, are more reliable, and have a
superior clamping system. In addition, the parts manual carries only
the newer exhaust manifolds and the new clamping system.
This work package covers removal of the new exhaust system with the
new clamping. The old exhaust system removal and replacement are
identical with the exception of the clamping. This work package
details the left side procedure only; the right side is the same.
New clamps (1) will not fit the old exhaust pipes at the center
bracket (2), lower pipe positions, both left and right sides.
Bracket cut away for clarity
Lower pipe cut
Ends of exhaust pipes
away for clarity of
mirror opposite side
WP 0107 00-2