INTAKE MANIFOLD ASSEMBLY REPLACE/REPAIR
1. Remove intake manifold assembly (1).
a. Remove eighteen nuts (2) with lock washers (3) and remove intake manifold assembly.
b. Remove and discard six cylinder flange gaskets (4).
Early model engines may have a two-piece
hose connection between the air outlet elbow
and intake manifold. If your engine has the
two-piece hose connection, you should
replace the existing (two hose and
intermediate pipe) set-up with the one-piece
hose (part number 11682625). Failure to
comply may lead to premature engine
failure due to dust ingestion.
1. Remove hose (5) with clamps (6) if not
already removed with turbocharger outlet
WP 0108 00-2