| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
POWER TAKEOFF DRIVE SHAFT REPLACE/REPAIR (2DR)
THIS WORK PACKAGE COVERS:
Disassembly, Assembly
INITIAL SETUP:
Tools and Special Tools:
Personnel Requirements:
General mechanic's tool kit (item 121, WP 0176)
Track Vehicle Repairer (1) 63H10
Torque wrench, 0-175-foot pounds (item 127,
Equipment Conditions:
Engine removed from vehicle and placed on a
Expendable and Durable Items:
flat stationary surface
Locking wire (item 43, WP 0173)
PTO/Fuel Pump Drive Housing Removed
NOTE
This work package describes how
to remove the PTO drive shaft
with the damper housing not
removed. The cap screws that
fasten the PTO drive shaft also
secure the damper. The damper
will remain in position with these
cap screws removed. The
procedure is the same whether the
damper housing is removed or not
- only the equipment conditions
change.
WP 0112 00-1
|
||
|
||
