Quantcast ASSEMBLY - TM-9-2815-220-240934

Custom Search
 
  
 
TM 9-2815-220-24
FUEL INJECTION NOZZLE REPLACE/REPAIR
0114 00
ASSEMBLY
NOTE
During assembly, the addition or removal of spring adjusting shims
(to obtain the correct gauge pressure reading on the nozzle tester)
may require various shim combinations available in the shim sets.
The nozzle assembly must be completely assembled, torque tightened
and checked again on the nozzle tester to assure proper spacer
combination and pressure reading. This procedure may have to be
repeated several times before achieving a satisfactory reading.
1. Install fuel inlet fitting (5) into body (6) and
32
torque to 70-75 foot-pounds (95-102 Nm).
5
2. Clamp body (6) in soft-jawed vise.
3. Install a new O-ring (32) (item 151,
6
WP 0175) on body (6).
4. Install retainer (2) on body (6).
5. Install spacer ring (31), shims (30), and fuel
injection nozzle seat (29) on body (6).
2
31
30
29
WP 0114 00-14

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +