Quantcast ASSEMBLY (Continued) - TM-9-2815-220-240935

Custom Search
 
  
 
TM 9-2815-220-24
FUEL INJECTION NOZZLE REPLACE/REPAIR
0114 00
ASSEMBLY (Continued)
NOTE
If you have the spring type retainer (23A) rather than the solid
retainer (23), discard the spring type retainer and use the new solid
type. Be sure to replace the soft gasket with a hard steel gasket and
mark the body top "D1".
5. Install nozzle valve (27) in nozzle body (28).
6. Install nozzle tip (26), spacer (11), seat (25), new spring (24) (item 168, WP 0175), and sleeve
(23) in nut (10).
7. While holding nut (10) and associated parts together as an assembly, install nut (10) on nozzle
and holder (3).
8. Torque nut (10) to 87-92 foot-pounds (118 -125 Nm), using torque wrench (item 127, WP
.
9. Test nozzle and holder (3) and adjust to achieve proper specifications. Refer to "TEST" in this
work package.
Identification Stamp
D1
11
3
24
25
27
26
23A
28
23
10
WP 0114 00-15

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.