Custom Search
 
  
 
TM 9-2815-220-24
FUEL INJECTION PUMP ASSEMBLY REPLACEMENT
0115 00
INSTALLATION (Continued)
6. Apply a small amount of Lubriplate (item 23, WP 0173) to mounting screw (25) and recessed
washer (23).
NOTE
Lower rear bolt (25) cannot be installed after fuel injection pump is in
place.
7.
Install mounting screw (25) and recessed washer (23) in lower rear hole of fuel injection
pump (2).
8. Install sling (26) on fuel injection pump (2) and finger tighten screw (25) as you install pump
in position on mounting bracket (28).
9. Apply a small amount of Lubriplate (item 23, WP 0173) to mounting screws (22, 24), and
three recessed washers (23).
10. Secure fuel injection pump (2) with four mounting screws (22, 24, 25) with recessed
washers (23).
11. Tighten four mounting screws (22, 24, 25) to 50-52 foot-pounds (68-71 Nm), using torque
wrench (item 127, WP 0176).
26
2
22
28
23 (4 places)
24
22
25
WP 0115 00-12

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business