FAN DRIVE CLUTCH ASSEMBLY AND ASSOCIATED PARTS
Do not attempt to pry seal housing
from fan tower: both the seal
housing and fan tower are made of
aluminum and are easily damaged.
1. Remove seal housing (1) from fan
a. Remove six screws (3) with flat
washers (4) securing seal housing (1).
b. Install two mechanical pullers (item 90,
WP 0175) in threaded holes (A) of seal
housing. Alternately tighten pullers to
remove seal housing (1).
c. Remove and discard gasket (5).
d. Remove seal (6) from oil seal
housing (1). Discard seal.
WP 0129 00-2