Quantcast REMOVAL (FROM STAND)

Custom Search
 
  
 
TM 9-2815-220-24
ENGINE ON MAINTENANCE STAND INSTALLATION/REMOVAL
0130 00
REMOVAL (FROM STAND)
WARNING
Use of incorrect sling can cause lifting point failure leading to injury
or even death of personnel.
Engine models 2CA and 2DA, use sling Part Number 12257229
(item 38, WP 0176). The front lifting points are as illustrated.
Engine model 2DR uses sling Part Number 11671664 (item 37,
WP 0176). The front lifting points are not illustrated: the 2DR front
lifting points are located on the damper housing.
1.
Attach sling (1) to hoist and to engine (2) at lifting eyes.
2.
Take slack out of sling (1).
3.
Remove four screws (5) with flat washers (6) from stand (3).
4.
With helper guiding engine (2), lift engine out of stand (3).
5.
Move stand (3) from under engine (2).
6.
With helper guiding engine (2), lower engine onto flat surface.
7.
Remove sling (1) from engine (2) and hoist.
1
2
3
5, 6
END OF WORK PACKAGE
WP 0130 00-3 (4 blank)

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +