CYLINDER ASSEMBLY REPLACEMENT
4. Rotate engine crankshaft until connecting rod (9) is at the top of its stroke.
Lubricating oil (item 21, WP 0173) must extend across face of washer
nut in order to obtain reliable torque.
5. Coat cylinder mounting studs (5) on crankcase with lubricating oil (item 21, WP 0173).
When removing crankcase protectors (8) from cylinder mounting
studs (5), be careful not to allow connecting rod (9) to forcibly drop
against the crankcase cylinder mounting surface or mounting studs.
Damage may occur.
WP 0133 00-10