CYLINDER ASSEMBLY REPLACEMENT
When more than one cylinder assembly is installed, each cylinder may
be installed and temporarily secured with two base nuts as described
prior to final torque procedure.
There are three different base nut wrench adapters. Use the adapter
that gives the best fit for each base nut.
8. Install remaining cylinder base nuts (2).
a. Assure that all cylinder, mounting studs (5) have been lightly coated lubricating oil
(item 21, WP 0173).
b. Install all remaining base nuts (2).
c. Alternately torque-tighten all cylinder base nuts (2) to 70-72 foot-pounds (95-97 Nm),
using torque wrench (item 127, WP 0176).
END OF WORK PACKAGE
WP 0133 00-12