1. Install oil gallery pipe plugs and/or fitting using Teflon pipe sealant.
a. There are seven main gallery ports (A) along the right side of crankcase.
b. On engine models 2CA and 2DA, install pipe plugs in all seven ports (A).
c. On engine model 2DR, install bushing (50) and 90-degree fitting (51) in port as illustrated.
Orient fitting (51) so that outlet points towards damper end of crankcase. Install pipe plugs
in remaining ports (A).
2. Install three pipe plugs (4) into crankcase as illustrated using Teflon pipe sealant.
A (seven places)
50, 51 (2DR only)
3. Install five pipe plugs using Teflon pipe sealant.
a. On inside of crankcase (1) at the flywheel end install four main oil gallery pipe plugs (2),
and one fan tower drain pipe plug (3).
END OF WORK PACKAGE
WP 0137 00-10