OIL PAN ASSEMBLY REPLACE/REPAIR
1. See Work Package 0028 for Standard Cleaning Procedures.
2. Assure that all oil passages are cleaned according to Work Package 0028.
All parts must be inspected with care. Replace parts if damage or wear exceeds allowable
1. See Work Package 0028 for Standard Inspection Procedures.
2. Check the oil pan (1) mounting flange (A) for flatness using a dial indicator (44)
(item 65, WP 0176). Replace oil pan if mounting flange is out of flat by more than
0.003 inch (0.0762 mm).
WP 0152 00-7