| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
GENERATOR DRIVE MECHANISM REPLACE/REPAIR (300 AMPERE)
0155 00
DISASSEMBLY
1. Remove and discard bearings (15) from drive gear (16).
CAUTION
Because the force used to press the bearing (15) from the gear is
through the individual balls and not the race, the bearing is destroyed
when it is removed. Do not use either bearing (15) once it has been
pressed from the gear.
a. Using an arbor press (item 8, WP 0176), remove and discard ball bearing (15) from either
end of drive gear (16).
b. Press opposite end ball bearing (15) from drive gear (16) in a similar manner.
15
16
15
2. Remove bearing (17) from idler spur gear (8).
a. Remove and discard retaining ring (18) from spur gear (8).
b. Using an arbor press, remove and discard ball bearing (17) from spur gear (8).
8
17
18
WP 0155 00-4
|
||
|
||
