Quantcast INSPECTION - TM-9-2815-220-241327

Custom Search
 
  
 
TM 9-2815-220-24
GENERATOR DRIVE MECHANISM REPLACE/REPAIR (650 AMPERE)
0156 00
DISASSEMBLY (Continued)
4. Remove bearing (20) from idler spur gear (10).
a. Remove retaining ring (21) from spur gear (10). Discard retaining ring.
b. Using an arbor press, remove and discard ball bearing (20) from spur gear (10).
10
20
21
INSPECTION
1. Measure inside diameter (A) of bearing bore in generator adapter (4). Replace generator
adapter if it is not within specifications in the following table.
2. If bearings were removed, measure outside diameter (B) on both ends of generator drive
gear (19). Replace drive gear (19) if it is not within specifications in the following table.
Location
Sizes and Fit of New Parts - inches (mm)
Wear Limits
A
2.8346 (71.9988)
2.8353 (72.0166)
2.8356 (72.0242)
B
1.3781 (35.0037)
1.3785 (35.0139)
1.3779 (34.9986)
B
4
19
B
A
WP 0156 00-5

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +