Quantcast INSPECTION - TM-9-2815-220-241338

Custom Search
 
  
 
TM 9-2815-220-24
STARTER DRIVE MECHANISM REPAIR
0157 00
CLEANING
1. See Work Package 0028 for Standard Cleaning Procedures.
INSPECTION
All parts must be inspected with care. Replace parts if damage or wear exceeds allowable
limits.
1. See Work Package 0028 for Standard Inspection Procedures.
2. Measure inside diameter of bearing bore (A) in bearing housing (16). Replace bearing housing
if not within specifications in the following table.
3. Measure inside diameter of seal bore (B) in bearing housing (16). Replace bearing housing if
not within specifications in the following table.
4. Measure tooth width (C) of spur gear (5). Replace spur gear if not within specifications in the
following table.
Location
Sizes and Fit of New Parts
Wear Limits
inches (mm)
A (bearing bore)
2.8346 (71.9988)
2.8353 (72.0166)
2.8356 (72.0242)
B (seal bore)
2.1240 (53.9496)
2.1260 (54.0004)
2.1270 (54.0258)
C (gear width)
0.8700 (22.0980)
0.8900 (22.6060)
None
5
C
16
B
A
WP 0157 00-6

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.