FUEL INJECTION ADVANCE CONTROL REPAIR
11. Remove cover (7) from bevel gear shaft (27).
An internal retaining ring (28) secures cover (7) to the bevel gear
shaft (27). Follow the procedure carefully to remove the cover.
Improper procedure can cause damage to the cover or the shaft.
a. Cut four pins (29) 7/16-inch (approximately) long from 7/32-inch diameter brass brazing
rod or other soft material.
b. Insert the pins (29) in the four equally spaced holes in bearing portion of cover (7).
c. Install fabricated ring compressing tool (30) (item 1, WP 0177) over the pins.
d. Tighten bolts (31) sufficiently to compress the cover (7) internal retaining ring (28).
e. Install bevel gear shaft (27) in a soft jawed vise and, using a gear puller
(item 85 WP 0176), remove cover (7).
f. Remove and discard retaining ring (28) from bevel gear shaft (27).
29 (four places)
WP 0161 00-6