FUEL INJECTION ADVANCE CONTROL REPAIR
All parts must be inspected with care. Replace parts if damage or wear exceeds allowable
1. See Work Package 0028 for General Inspection Procedures.
2. Visually inspect spring retainers (18) and seats (19) for cracks, indentations or other damage.
Replace any damaged parts.
3. Springs (24) are mandatory replacement items. Replace with new springs (item 242.1, WP
0175) that conform to free length (A) and compressed length (B) in the following table.
Sizes and Fit of New Parts
A (Free length)
1.6300 (41.402) approximate
B (Compressed length)
0.6510 (16.5354) maximum
Scale reading at
1.03 inch (26.162 mm)
WP 0161 00-8