FUEL INJECTION ADVANCE CONTROL TEST
5. Note and record reading from electronic counter (14).
a. The next page of this work package has a form for recording this data.
6. Press oil drain switch (30).
a. The oil pressure indicator gauge (27) should register zero (0) psi (0 kPa) with the switch
b. Observe electronic counter (14) with the switch depressed. If the counter has changed
more than 2 degrees, the advance unit requires adjustment. Refer to adjustment procedure
in this work package.
7. Release oil drain switch (30) and turn speed regulator control (8) clockwise to increase the
speed to 600 rpm.
a. Note and record the electronic counter (14) reading at each 200-rpm increment beginning
at 600 rpm and continuing through 2600 rpm.
8. Reduce speed to 600 rpm and recheck electronic counter (14) reading.
a. If this reading does not repeat the original reading, repeat the test.
WP 0162 00-9