TM 9-2815-225-34&P 3-43. OIL PAN, DIPSTICK, OIL SUCTION TUBES, AND BREATHER TUBE REPAIR (Contd) LOCATION/ITEM ACTION REMARKS c.  Inspection (Contd) 12. Oil level dipstick (20), oil Inspect for the following: level dipstick tube (19), clamp (21), and cover (22) a.  Cracks in area where clamp Discard if cracked. (21) is positioned around oil level dipstick tube (19). b.  Stress cracks in area where This requires careful oil level dipstick tube (19) fits examination.  Discard both if in cover (22). cracked.  Do not separate oil level dipstick tube (19) from cover (22). c.  Tightened seal where oil level Discard oil level dipstick (20) if dipstick (20) tightens against seal is worn. inside of oil level dipstick tube (19). d.  Cracks in oil level dipstick (20). Discard if cracked. 13. Tube brace (18) Inspect for cracks. Discard if cracked. NOTE Perform step 14 for M915/Big Cam I only. Perform step 15 for M915A1/Big Cam III only. 14. Oil suction hose (24) (M915/ Inspect for cracks or damage Discard if cracked, worn, or Big Cam I), adapter (28), caused by rubbing from vibration. damaged. bracket (27), spacer (26), and clamp (25) 15. Oil suction tube (23) Inspect for cracks or other damage. Discard if cracked or damaged. (M915A1/Big Cam III) 3-240