FLEXPLATE OR FLYWHEEL, FLYWHEEL HOUSING, AND REAR COVER INSTALLATION (Contd)
e. Using dial indicator (13),
Must be on a common center
check alignment of rear cover
with crankshaft within 0.010 in.
(M915/Big Cam I) or cover
(0.254 mm). Must be square to
(M915A1/Big Cam III) (2).
centerline of crankshaft within
0.010 in. (0.254 mm). Must be with-
in 0.004 in. (0.102 mm) of being
flat with oil pan flange of cylinder
f. Tighten eight screws (3) to
30-35 lb-ft (41-48 Nm).
g. Cut off excess gasket (1)
Gasket (1) must be even with
or not more than 0.010 in.
(0.254 mm) above oil pan flange.