TM 9-2815-225-34&P 3-81. OIL PAN INSTALLATION (Contd) LOCATION/ITEM ACTION REMARKS Installation (Contd) 10. Four screws (12) Finger-tighten two screws (12) on each side of oil pan rear corner. 11. Twenty-eight screws (12) Tighten on oil pan (3) (M915/Big Tighten screws to 35-40 lb-ft and four screws (14) Cam III) or (37) (M915/Big Cam I) (41-48 Nm). (M915AlIBig Cam III) or to cylinder block (1) and front (36) (M915/Big Cam I) cover. 12. Four screws (18) and Install on flywheel housing (20) Do not tighten screws at this time. washers (19) (M915/Big Cam I) and oil pan (37). 13. Two screws (21), four Install on oil pan (37) and washers (22), new lock- flywheel housing (20). washers (23), and nuts (24) (M915/Big Cam I) 14. Four screws (18) and two Install on flywheel housing (20) Tighten screws to 70-80 lb-ft nuts (24) (M915/Big Cam I) and oil pan (37). (95-109 Nm). 15. Four screws (6), new Install on oil pan (37). Tighten screws to 15-20 lb-ft lockwashers (5), and (20-27 Nm). washers (4) 3-624