Quantcast INSPECT CONNECTING RODS

Custom Search
 
  
 
TM 9-2815-226-34-1
3-17. INSPECT CONNECTING RODS
a. Magnaflux all rods, caps, and cap bolts.
b. Discard cracked components.
c. Discard rod if nicked or dented in excess of 1/32 in. (0.80 mm) deep in beam area.
NOTE
Ensure that rod and cap are kept mated at all times.
d. Secure cap to rod with cap bolts. Alternately torque cap bolts in following sequence:
70 - 75 ft lbs (95 - 102 Nm )
(1) Tighten To
140 - 150 ft lbs (190 - 203 Nm )
(2) Advance To
(3) Loosen All
Completely
25 - 30 ft lbs (34 - 41 Nm)'
(4) Tighten To
70 - 75 ft lbs (95 - 102 Nm )
(5) Advance To
140 - 150 ft lbs (190 - 203 Nm )
(6) Advance To
3-128


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.