Quantcast FUEL PULSATION DAMPER AND FILTER HEAD ASSEMBLY REPAIR

Custom Search
 
  
 
TM 9-2815-226-34-2
3-79. FUEL PULSATION DAMPER AND FILTER HEAD ASSEMBLY REPAIR
a. Remove captive washer screws securing plate to filter head and remove plate, nylon washer, 0-ring, damper
diaphragm, and O-ring from filter head. Discard nylon washer and O-ring.
b. Remove plug from filter head.
WARNING
COMPRESSED AIR USED FOR CLEANING PURPOSES WILL NOT EXCEED 30
PSI (207 KPA).
USE ONLY WITH EFFECTIVE CHIP GUARDING AND
PERSONAL PROTECTIVE EQUIPMENT (GOGGLES, SHIELD, GLOVES, ETC.).
P-D-680 SOLVENT IS POTENTIALLY DANGEROUS.  AVOID PROLONGED OR
REPEATED CONTACT WITH SKIN. KEEP AWAY FROM FLAME OR EXCESSIVE
HEAT.
c. Clean all fuel pulsation damper components with cleaning solvent. Blow dry with compressed air.
3-296


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.